Call Us Free 1-888-499-0123
Fastest Router on The Planet
Shopping Cart 0 items - $0.00
MOFI4500-4GXeLTE V3 Download Section

MOFI4500-4GXeLTE V3 Download Section

MOFI4500-4GXeLTE V3 Download/Firmware Update Section:

If you want to see a video on how to do the firmware update, you can look at it here:



The current user manual is located here:




There are various models of the MOFI4500-4GXeLTE V1, V2 and V3 model
Each model has its own firmware and cannot use with each other.

As such, it is important to know if you have a V1, V2 or V3 model before doing the update
To know, look at the bottom of the router or the top

It will say V1, V2 or V3

This download section is for the MOFI4500-4GXeLTE V3 download
It is the same download as the MOFI4500-4GXeLTE-SIM4-V3, MOFI4500-4GXeLTE-SIM4-GPS-V3 and MOFI4500-4GXeLTE-SIM7-V3


If you load a MOFI4500 V2 firmware or any other firmware and kill the router,

You can use this V3 Recovery firmware to get it back up
Please save both this recovery as well as the latest firmware on the page below to your pc

Once you have this on, then you can load the latest firmware which is currently 1.1.8std




To do the recovery on the MOFI4500 V3 router, please follow these steps as it is a bit different than the V2 model



Here is the latest official firmware for the MOFI4500-4GXeLTE V3:

Firmware 1.1.8std (For all providers)
Date Released: Jan 12 2021




checksum: 6d1caab7f06132bb33258c3bd8822888

Change Logs:

- 1.1.8 Roaming on SIM card is set to OFF by default. Can be turned on if needed
- 1.1.8 Setting for RING DOORBELL available under System - Misc Settings
- 1.1.8 Updated USB Printer settings
- 1.1.5 Updated Re connection settings for module
- 1.1.2 Fix wizard issue where it would not run sometimes
- 1.1.0 Fix issue with IP Pass Through when booting and have issues logging back in the router
- 1.0.8 Fix Band Lock Watcher that was causing an issue when auto band lock is selected
- 1.0.8 IP V6 Updated with bug fixes (note IP V6 is off by default but can be turned on in GUI)
- 1.0.8 SAMBA File Shared Added
- 1.0.6 Fixed Band Scanner Issues
- 1.0.6 Fixed Band Lock sometimes not locking correct
- 1.0.5 Updated SIM7 settings
- 1.0.3 Updated re-connection option to specify website pings
- 1.0.3 Updated Security patch
- 1.0.1 Fixed remote firmware update section to point to correct V3 firmware

Instructions on how to update the router:

To do the firmware update, connect to the router with a network cable from your pc to the router or connect via wifi to it.

You should not use Google Chrome to do the firmware update or anything else when you log into the router.
Use Internet Explorer, Firefox or Safari web browser to do this update.

1) Power on router and connect to port 1-4 on the back of the router or connect to the wifi network on the router

2) After router is completed booting up (takes approx 60 seconds) and power light is solid, open up your internet explorer, firefox or safari
(do not use Google Chrome)

3) In the address bar, enter
username: root
password: admin

4) Click on basic mode on the top right and then click on the system system on the side

5) Click on Manually Flash Firmware which is located under System

6) Un-check "Keep Settings" and click on Browse... or Choose File

7) Locate the file that you saved and click on Open

8) Click on "Upload image"

checksum: 6d1caab7f06132bb33258c3bd8822888

If the checksum is not the same as listed here, delete the file you have and re-download it.

9) Click "Proceed" to start the update process (may take up to 2 mins).
When the power light starts to blink, the update is completed and the router is rebooting.

10) After update is completed and power light is solid, you will be prompt to log in
If not, make sure you are connect to the router via wifi or Ethernet and go back to the log in
username: root
password: admin

11) After you are logged in, do a factory default that is located in basic mode then system then factory default.

Do the default and that would complete all the steps for this update.